Display Assembly - HP Classmate Maintenance And Service Manual

Display assembly

For a list of individual display spare parts, see
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery cable from the system board.
Remove the display assembly:
1. Remove the following:
(1): 2 round rubber screw covers near the webcam
(2): 2 rubber screw covers near the hinge cover
(3): 4 round rubber bumpers in the corners of the display
46 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Display components on page
Bottom cover on page 22).
12.