Pre-Operation Checks - BMS Ranch Pony 800 F Series Owner's Manual

the below schedule.
Starting and Operating Instructions
● Before starting the engine, be sure
that the driver is seated properly in
the UTV and tighten the seat belts.
● Testing the UTV in an open place at
the beginning to learn how to start,
turn and stop.
● Operate the UTV slowly until you are
familiar with it.
● The turning radius of this UTV is small
and agile, so the centrifugal force is
very high when turning at high speed.
Slow down to a more controllable
speed when turning to prevent the
UTV from rolling over.
● To prevent vehicle from rolling over,
be sure to only turn the vehicle at a
slow more controllable speed.

PRE-OPERATION CHECKS

Before using this vehicle, check the
following points
! WARNING
POTENTIAL HAZARD
Failure to inspect the vehicle before
operating. Failure to properly maintain
the vehicle.
WHAT CAN HAPPEN
Increases the
63
possibility of an