BMS Ranch Pony 800 F Series Owner's Manual page 115

Table of Contents

Advertisement

1. Oil filter cover
2. Exhaust pipe
Remove the oil filter and replace with
a new filter.
Check the cover O-ring and change it
if necessary
1. Oil filter
2. O-ring
3. Oil filter cover
Screw oil filter cover in place.
Wipe out any oil spillage on engine.
Change gasket on oil drain plug.
Clean gasket area on engine and oil
drain plug then reinstall plug. Refill
engine at proper level with the
recommended
SPECIFICATIONS for capacity.
Start engine and let idle for a few
minutes. Ensure oil filter area and oil
drain plug areas are not leaking.
Stop engine. Wait a while to allow
oil to flow down to crankcase the
n check oil level. Refill as necessa
ry.
Dispose of oil as per your local
environmental regulations.
Engine Coolant
Recommended coolant
Always use ethylene-glycol antifreeze
115
oil.
Refer
to

Hide quick links:

Advertisement

Table of Contents
loading

Related Products for BMS Ranch Pony 800 F Series

This manual is also suitable for:

Apu08elApu08e

Table of Contents