BMS Ranch Pony 800 F Series Owner's Manual page 119

engine is calibrated to operate specifically
with these components.
Remove access panel.
Loosen clamp and remove air filter.
1. Clamp
2. Air filter
Cleaning
Pour cleaning solution or an equivalent into
a bucket. Put the filter in to soak.
While filter soaks, clean inside the air filter
housing.
Rinse the filter with warm water until all
cleaning solution disappears.
Then, let the filter dry completely.
Installation
Properly reinstall removed parts in the
everse order of their removal.
Drive Belt
See and authorized ODES dealer to check
the width and the condition of drive belt.
CVT Cover Drain Screw
Any time you suspect that water has
entered the CVT cover, drain the CVT
housing by removing the drain screw.
119