Accelerator Pedal - BMS Ranch Pony 800 F Series Owner's Manual

●Do not use accessories requiring
move than the above maximum
capacity. This may overload the
circuit and cause the fuse to blow.
●If accessories are used without
the engine running or with the
headlights turned on, the battery
will lose its charge and engine
starting may become difficult.

Accelerator pedal

Press the accelerator pedal down to
increase engine speed. Spring pressure
returns the pedal to the rest position
when released. Ways check that the
accelerator pedal
before starting the engine
1. Accelerator pedal
Before starting the engine, check the
accelerator pedal to be sure it is
operating smoothly. Make sure the
accelerator pedal fully returns to the idle
position as soon as it is released.
42
returns normally