BMS Ranch Pony 800 F Series Owner's Manual page 114

and Oil Filter Replacement
Oil and filter are to be replaced at the
same time. Oil change should be
done with a warm engine.
The engine oil can be very
hot. In order to avoid
potential burns, do not
remove the engine drain
plug or the filter cover if
the engine is hot. Wait until
engine oil is warm.
Ensure vehicle is on a level surface.
Remove dipstick.
Clean the oil drain plug area.
Place a drain pan under the oil drain
plug area.
Unscrew oil drain plug.
TYPICAL
1. Oil drain plug
Allow enough time for oil to flow out of
oil filter.
Unscrew the oil filter cover.
114