BMS Ranch Pony 800 F Series Owner's Manual page 107

UTV have fuses to protect them from
damage caused by excess current
flow ) short circuit or overload).
If something electrical on your UTV
stops working, the first thing you
should check for is a blown fuse (1).
Check all the fuses before looking
elsewhere for another possible cause
of the problem. Replace any blown
fuses and check component
operation.
(1) Blown fuse
Fuse replacement
The main fuse and the fuse boa are
located under the hood. If a fuse is
blown, turn off the main switch and
install a new fuse of the specified
amperage. If a fuse is blown, replace
it as follows.
1. Remove the battery compartment
cover by lifting it up and pulling it out.
2.Turn the key to ―OFF‖ and turn off
the electrical circuit in question.
CAUTION:
107