To Shoot A Snapshot - Casio EX-FR200 User Manual

To shoot a snapshot

1.
Point the camera at the subject.
2.
Press the camera or controller shutter button.
The camera will automatically adjust exposure and
focus, and then shoot the snapshot.
• Normally, shooting a snapshot will cause the
operation lamp to flash red once. The camera will
automatically put the entire image in focus, and
then shoot the snapshot.
Shooting a Movie
Press [0] (Movie) on the camera or controller to start
movie recording.
To stop movie recording, press [0] (Movie) again.
See page 47 for details.
NOTE
• You also touch a location on the screen to focus on it,
and then shoot the image (page 50).
• With this mode, the image size is fixed at 15M
(3888 x 3888).
• The operation lamp flashes red while movie recording
is in progress.
. Shooting with the Camera Alone
You can use the camera in a stand-alone configuration without turning on the
controller or otherwise establishing a connection between it and the camera.
• If an Interval Shooting (page 42) operation or movie recording (page 47) is in
progress, it will continue to shoot images even when controller power is turned off.
Camera
Controller
34
Operation lamp
Shutter button
[0] (Movie)
[0] (Movie)
Shutter button
Quick Start Basics