Casio EX-FR200 User Manual page 143

Table of Contents

Advertisement

Problem
File Deletion
A file cannot be
deleted.
Wireless Connection
I can't establish a
wireless connection.
The wireless LAN
connection is
broken.
I forgot my SSID
and password.
Bluetooth wireless technology
A connection cannot
be established
between the camera
and controller.
Possible Cause and Recommended Action
The file may be protected. A protected image cannot be
deleted.
1)The camera cannot connect with a smartphone if they are
too far apart from each other.
2)The smartphone may be connected with another wireless
device. Check the smartphone's Wi-Fi settings and confirm
that the camera is selected for wireless LAN connection
(page 72).
3)Connection may have been lost due to interference caused
by a nearby microwave oven, cordless phone, or other
wireless device. Move the camera away from the device
causing the problem.
While holding down [0] (Movie) and the shutter button on the
camera, hold down [
camera's operation lamp will go out and then the password will
be returned to its initial default setting. Note that initializing the
password unpairs the camera and smartphone, so you will
need to pair them again. For information about the initial
default password settings, see page 71.
1)The camera cannot connect with the controller if they are too
far apart from each other.
2)A Bluetooth connection cannot be established with the
camera while it is connected to a smartphone by wireless
LAN. Terminate the wireless LAN connection.
3)If the camera is connected to a computer, unplug the USB
cable to terminate the connection.
4)If you still cannot establish a connection, perform the steps
below to re-pair the camera and controller.
Remove the memory card from the camera.
While holding down the camera shutter button, hold
down [
] (Power) for at least one second.
While holding down the controller shutter button, hold
down [
] (Power) for at least six seconds.
The operation lamp will flash amber, and then the pairing
operation required for Bluetooth connection will start.
143
] (Power) for about six seconds. The
Appendix

Advertisement

Table of Contents
loading

Table of Contents