Table of Contents
Advertisement
PicoScope 2104 & 2105 PC Oscilloscope User Guide
8
3
Technical reference
3.1
Driver
Once you have installed the PicoScope and PicoLog software, Windows will
automatically install the driver when the PicoScope PC Oscilloscope is plugged in for
the first time.
The Windows 98SE/ME/2000/XP/2003 32-bit driver,
Windows directory. It is loaded using an
3.2
Driver error codes
This section is aimed at those people who intend to write their own programs for use
with the driver. A description of the driver error codes is given below. If the PicoScope
or PicoLog software reports an error, refer to the FAQ.
Code Enumeration
0
PS2000_OK
1
PS2000_MAX_UNITS_OPENED
2
PS2000_MEM_FAIL
3
PS2000_NOT_FOUND
4
PS2000_FW_FAIL
5
PS2000_NOT_RESPONDING
6
PS2000_CONFIG_FAIL
7
PS2000_OS_NOT_SUPPORTED
PS2100044-1.0
picopp.sys
file,
inf
picopp.inf
Description
The PicoScope 2000 Series unit is functioning
correctly.
Attempts have been made to open more than
PS2000_MAX_UNITS
Not enough memory could be allocated on the
host machine.
No PicoScope 2000 Series unit could be found.
Unable to download firmware.
The PicoScope 2000 Series unit is not responding
to commands from the PC.
The configuration information in the oscilloscope
has become corrupt or is missing.
The operating system is not one of the supported
products: Windows 98SE, ME, 2000, XP and
2003.
Copyright 2006 Pico Technology Limited. All rights reserved.
, is installed in the
.
units.
Advertisement
Table of Contents
