Using The Touch Control Sensors; Switching The Appliance On - Samsung CTR264KC01 User & Installation Manual

USING THE TOUCH CONTROL SENSORS

To operate the touch control sensors, touch the desired panel with
the tip of your pointed finger until the relevant displays illuminate or
go out, or until the desired function is activated.
Ensure that you are touching only one sensor panel when
operating the appliance. If your finger is too flat on the panel, an
adjacent sensor may be actuated as well.

SWITCHING THE APPLIANCE ON

1. Touch the Lock control
seconds.
2. The appliance is switched on using
the On/Off control
Touch the On/Off control
sensor for 1 second. The digital
displays will show .
After the On/Off control
to switch on your appliance, a heat setting must be
selected within approximately 10 seconds. Otherwise,
the appliance will switch itself off for safety reasons.
CTR264KC01_XFA DG68-00446A-02_EN.indd 22
sensor for approximately 3
sensor.
sensor has been actuated
English - 22 English - 22
approx. 1 sec.
2016-09-02 1:29:05