Connecting To The Mains Power Supply - Samsung CTR264KC01 User & Installation Manual

CONNECTING TO THE MAINS POWER SUPPLY

Before connecting, check that the nominal voltage of the
appliance, that is, the voltage stated on the rating plate,
corresponds to the available supply voltage. The rating plate is
located on the lower casing of the hob.
Shut off power to circuit before connecting wires to
WARNING
circuit.
The heating element voltage is AC 230 V~. The appliance also
works perfectly on networks with AC 220 V~ or AC 240 V~.
The hob is to be connected to the mains using a device that
allows the appliance to be disconnected from the mains at
all poles with a contact opening width of at least 3 mm, eg.
automatic line protecting cut - out, earth leakage trips or fuse.
A type H05RN - F cable or one of a higher grade must be used as
the mains connecting cable.
1N~
2N~
The connection must be carried out as shown in the diagram.
The connecting links should be fitted according to the appropriate
connection diagram.
The earth lead is connected to terminal. The earth lead must be
longer than leads carrying electric current.
The cable connections must be made in accordance
WARNING
with regulations and the terminal screws tightened
securely.
The connecting cable is to be secured with the mains cable cleat
and the covering closed by pressing firmly (locking into place).
Before switching on for the first time, any protective foil or stickers
must be removed from the ceramic glass surface.
CTR264KC01_XFA DG68-00446A-02_EN.indd 11
Rated current of
appliance (A)
> 25 and ≤ 32
> 10 and ≤ 16
English - 11 English - 11
Nominal cross-sectional
area (mm
≥ 2.5
≥ 1.5
)
2
2016-09-02 1:29:02