Removing The Main Board - JVC UX-G1 Service Manual

3.1.2 Removing the Main board

(See Fig.6, 7)
• Prior to performing the following procedure, remove the rear
cover assembly.
(1) Disconnect the wire from all connectors on the main board.
(2) Cut off the band setting the wire.
(3) Remove the two screws F and release the joint b.
1-8 (No.MB412)
Front panel
assembly
CN260
CN402
CN401
CN301
CN370
CN850
CN851
Fig.6
Joint b
CD mechanism
assembly
Fig.7
CD mechanism
assembly
CN801
Main board
Front panel assembly
F
Main board