Table of Contents
Advertisement
Quick Links
WWW.LIGHTEMOTION.COM.AU
P64100RGB
User's instruction manual
This manual contains important information about the safe installation and use of this product
Please read this instruction manual carefully before installing or operating
Please keep these instructions in a safe place for future reference
www.lightemotion.com.au
Advertisement
Table of Contents
Related Manuals for Light Emotion P64100RGB
Summary of Contents for Light Emotion P64100RGB
- Page 1 WWW.LIGHTEMOTION.COM.AU P64100RGB User’s instruction manual This manual contains important information about the safe installation and use of this product Please read this instruction manual carefully before installing or operating Please keep these instructions in a safe place for future reference...
-
Page 2: What Is Included
Congratulations on the purchase of your P64100RGB by Light Emotion. We are confident that you will be satisfied with your purchase. We have prepared this manual to assist you with the operation of this item. CONTENTS SECTION Page WHAT IS INCLUDED, SAFETY INSTRUCTION POWER, FUSE, INSTALLATION MAINTENANCE &... -
Page 3: Installation
• In the event of serious operating problem, stop using the unit immediately. Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest authorized technical assistance center. •... -
Page 4: Dmx Terminator
2. This lighting effect must be 0.5m away from any flammable materials or any walls or ceilings. 3. Do not block or inhibit the air flow from the ventilation holes. Light Emotion have various hook clamps* and safety wires* suitable for your PAR 64LED Please contact your local dealer for more information *Not included. -
Page 5: Operation
OPERATION: There are six operation modes which are selected by ‘MODE’ button. The dot that locates at the fourth LED display letter will flick when you operate it, and the dot will automatically turn off after 60 seconds if you do not select anything. The LED display shows the current operation mode. When LED display switches off, press the ‘MODE’... - Page 6 1. Manual color mode 1) Manual color select Set up color: Press "MODE" button, select the manual color select mode. Use "UP" or "DOWN" button to set the dimming rate from 0 to 255 for Red, Green and Blue. Press "SET UP" to confirm your setting.
- Page 7 5. Other function 1) Display on / off Press “SET UP” button to find " "(LED display always on) or " "(LED display turns off automatically after 60 seconds if there is no operation), press UP or DOWN to select display on or off.
- Page 8 3 channels mode • Channel Value Function 000-031 032-063 064-095 Green 096-127 Blue 128-159 Yellow 160-191 Purple 192-223 Cyan 224-255 White 0 - 255 MASTER DIMMER 0% - 100% 0-15 STROBING OFF 16-255 STROBING SLOW - FAST : 3A channels mode •...
- Page 9 5 channels mode • Channel Value Function 000-255 MASTER DIMMER 0% - 100% 000-031 Channel Value Function 0-255 0% - 100% 0-255 GREEN 0% - 100% 0-255 BLUE 0% - 100% 032-063 064-095 Green 096-127 Blue 128-159 Channel 1, 2 & 3 N/L Yellow 160-191 Purple...
- Page 10 mode channels • FUNCTION Green Blue 0-255 Dimmer 0-255 0-255 (dim mode (dim→ (dim→ Strobe Off (0-51) → bright) bright) (0-16) bright) 000-031 Strobe 032-063 slowest to Static 064-095 Green fastest color 096-127 Blue (16-255) mode 128-159 Yellow 160-191 Purple (52-102) 192-223 Cyan...
-
Page 11: Specifications
SPECIFICATIONS: • Power input: AC 90V-240V/50HZ-60HZ • Wattage: 90W • LEDs: 1PC 100W (RGB 3 in 1) COB LED • Beam angle of LEDs: 85 degree, 40 degree as accessory • 3-pin female XLR socket and 3-pin male XLR socket •...