Projection From Behind The Screen; Projection Using A Mirror - Sharp XV-Z12000 Operation Manual

Setup
Projecting a Reversed/Inverted Image

Projection from behind the screen

I Place a translucent screen between the projector and the au-
dience.
I Reverse the image by setting "Rear" for "PRJ Mode" in the
"Options" menu. See
page 73 for use of
this function.

Projection using a mirror

I Place a mirror (normal flat type) in front of the lens.
Info
• When using a mirror, be sure to carefully position both the pro-
jector and the mirror so the light does not shine into the eyes of
the audience.
Ceiling-mount setup
I It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
I Before mounting the projector, contact your nearest Authorized
SharpVision Service Center or Dealer to obtain the
recommended ceiling-mount bracket (sold separately). (AN-
CM250 ceiling-mount bracket, AN-EP101B extension tube for
AN-CM250.)
I Be sure to adjust the position of the projector to match the
distance (z) from the lens center position (see page 31) to the
lower edge of the image,
when mounting the projec-
tor on the ceiling.
I Invert the image by setting
"Ceiling + Front" for "PRJ
Mode" in the "Options"
menu. See page 73 for use
of this function.
-32
Downloaded from ProjectorsManual.com Manuals
When using the default setting.
MOn-screen Display
The image is reversed.
When using the default setting.
MOn-screen Display
The image is inverted.