Sharp XV-Z12000 Operation Manual page 42

Checking
Adjusti
This function allows you to check the current
Setting the
Use the Fine
input signal information.
portions of th
of the Tar
Select Ò Signal InfoÓ in the Ò Fine SyncÓ
menu on the menu screen.
➝For operating the menu screen, see
pages 42 to 45.
When Au
Auto Sync Adjustment
Select Ò LightnessÓ in the Ò C.M.S.Ó
Used to automatically adjust a computer image.
sting the Gamma
menu on the menu screen.
➝For operating the menu screen, see
Select Ò Auto SyncÓ in the Ò Fine SyncÓ
the gamma curve to suit your prefer-
menu on the menu screen.
pages 42 to 45.
These gamma values can be adjusted
When Ò Auto SyncÓ is Ò OFFÓ , interference
➝For operating the menu screen, see
hen the gamma position is set to Ò Cus-
such as flickering or vertical stripes may oc-
pages 42 to 45.
or Ò Custom 2Ó .
cur if displaying tilings or vertical stripes.
t the gamma item in the Ò GammaÓ Should this occur, adjust Ò ClockÓ , Ò PhaseÓ ,
djusting Im
Ò H-PosÓ and Ò V-PosÓ for obtaining an opti- Note
on the menu screen.
allows you to select features for
mum image.
operating the menu screen, see
When setting to Ò
e image.
s 42 to 45.
Ò High SpeedÓ :
Select Ò ClockÓ , Ò PhaseÓ , Ò H-PosÓ or Ò V-
CÓ in the Ò SpecialsÓ on the
Auto Sync adjustment will occur when the
PosÓ in the Ò Fine SyncÓ menu on the
you to select the progres-
menu screen. projector is turned on or when the inputs
menu screen.
deo signal. The progres-
are switched, while connected to a com-
witched by pressing Note
➝For operating the menu screen, see
a smoother video image.
puter.
ating the menu screen, see
reset all adjustment items, select "Re- pages 42 to 45.
Setting the Chromatic
45.
eÓ in the Ò SpecialsÓ
" and press .
Manual adjustments should be per-
Value of the Target
ctureÓ menu screen.
Selected Item formed:
Color
ched by pressing .
When the optimum image cannot be
Clock
m Description
achieved with Auto Sync adjustment. See
he menu screen, see
enu on the
Phase
Sharp default setting
page 57.
Select Ò ChromaÓ in the Ò C.M.S.Ó menu
ed Item Description
b menu.
H-Pos
Emphasize outlines a little Auto Sync adjustment may take some
on the menu screen.
enu screen, see
ma For adjusting the display characteristic of red color
Description
time to complete, depending on the im-
➝For operating the menu screen, see
V-Pos
amma)
eful to display fast-moving age of the computer connected to the
pages 42 to 45.
ma For adjusting the display characteristic of green color
projector.
ages such as sports and
the
Gamma)
tion films. This mode
Note
Emphasize outlines most
When setting "Auto Sync" to "OFF" or
ma For adjusting the display characteristic of blue color
timizes the image in a
Computer image adjustments can be made
amma)
"High Speed", and if
splayed frame.
easily by pressing
Sync will be executed in "High Speed"
For adjusting the contrast level of red color
seful to display relatively
details.
mode. If the button is pressed again
ain)
ow-moving images such as
the
To reset all adjustment items, select "Re-
Description
within one minute, Auto Sync will be ex-
For adjusting the contrast level of green color
ama and documentary
1.
set" and press
ecuted in "Normal" mode.
Gain)
ore clearly.
ng the contrast level
ct the set-
For adjusting the contrast level of blue color
is mode optimizes the
ng the brightness of an image
g All Adjust-
ain)
yed in the
age by estimating the
tem
Setting the Hue of the
ng the color intensity of an image
ms
For adjusting the brightness level of red color
ovement of a number of
Target Color
ng the tones of an image
fset)
eceding and succeeding
Saving Adjustment
allows you to reset all adjust-
g sharper or softer the contour of an image
mes.
t For adjusting the brightness level of green color
Main menu Sub menu
o the default setting.
Settings
Offset)
Options Digi. Shift
eproduces the image of film Select Ò HueÓ in the Ò C.M.S.Ó menu on
ng the color temperature of an image
Page 66
etÓ in the Ò PictureÓ menu on
Subtitle
This projector allows you to store up to seven
urce* clearly. Displays the em, For adjusting the brightness level of blue color
the menu screen.
Reset
creen and press .
adjustment settings for use with various com-
fset)
➝For operating the menu screen, see
timized image of film em.
STANDBY
LED [ON/OFF]
ating the menu screen, see
puters.
cted
nsformed with three-two
pages 42 to 45. button
Lamp Timer
45.
ed.
ll down (NTSC and
Select Ò Save SettingÓ in the Ò Fine SyncÓ
OSD Display
button
fol-
screen Display (Example)
AL60Hz) or two-two pull
menu on the menu screen.
Con-
wn (PAL50Hz and
➝For operating the menu screen, see
Video System
Downloaded from ProjectorsManual.com Manuals
1 mode
ECAM) enhancement to
ngs differ depend-
pages 42 to 45.
ogressive mode images.
g RGB* signal.
NormalÓ or
.
Adjusts vertical noise.
Adjusts horizontal noise (similar to tracking on your VCR).
Centers the on-screen image by moving it to the left or right.
For giving greater depth to brighter
Centers the on-screen image by moving it up or down.
portion of image in red color.
For giving greater depth to brighter
portion of image in green color.
For giving greater depth to brighter
portion of image in blue color.
is pressed, Auto
. See page 59 for
For less contrast in red color
button
For less contrast in green color
.
For less contrast
For less contrast in blue color
For less brightness
For less color intensity
For less brightness in red color
Skin tones become purplish
For less sharpness
For less brightness in green color
MENU
–30 +30 Decreases color
temperature for warmer,
button
–30 +30
For less brightness in blue color
reddish, incandescent-
like images.
Normal
Level A
Level B
Auto
PAL (50/60Hz)
SECAM
, , ,
NTSC4.43
NTSC3.58
Description
Screen display during Auto Sync
button
For giving greater depth to darker
Sub menu portion of image in red color.
For giving greater depth to darker
portion of image in green color.
For giving greater depth to darker
portion of image in blue color.
For more contrast in red color
button
For more contrast in green color
AUTO SYNC button
For more contrast
For more contrast in blue color
For more brightness
For more color intensity
For more brightness in red color
Skin tones become greenish
For more sharpness
For more brightness in green color
Increases color
temperature for cooler,
For more brightness in blue color
bluish, fluorescent-like
images.
button