Glossary - Sharp XV-Z12000 Operation Manual

Glossar
CONSUM
Advanced int
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when
shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair
the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for
parts or labor for the period(s) set forth below.
Troubleshooting
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any
High quality resizing of lower and higher resolu-
Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal
tion images to fit the projector's native resolution.
service or handling, or which has been altered or modified in design or construction.
Aspect Ratio
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of
Width and height ratio of an image. The normal
purchase to the servicer.
Problem
aspect ratio of a computer and video image is 4:3.
There are also wide images with an aspect ratio
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED
of 16:9 and 21:9.
WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED
TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an
Auto Sync
implied warranty lasts, so the above limitation may not apply to you.
Optimizes projected computer images by auto-
matically adjusting certain characteristics.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein,
or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
Background
Initial setting image projected when no signal is
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive
No picture and no sound being output.
remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute
complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full
or projector does not start.
Clock
satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any
Clock adjustment is used to adjust vertical noise
way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
when clock level is incorrect.
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not
CLR Temp (Color temperature)
apply to you.
Function that can be used to adjust the color tem-
perature to suit the type of image input to the pro-
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
jector. Decrease the color temperature to create STATE.
warmer, reddish images for natural flesh tones,
or increase to create cooler, bluish images for a
Model Specific Section (In-Home Service)
brighter picture.
Color is faded or poor.
Your Product Model Number & Description:
C.M.S. (Color Management System)
Function allows you individually adjust the display
characteristics of six colors (R: Red, Y: Yellow, G:
Green, C: Cyan, B: Blue, M: Magenta)
Warranty Period for this Product:
Digital Shift Setting
The image can be moved vertically when the im-
Picture is blurred;
age display mode is set to SMART STRETCH or
noise appears.
CINEMA ZOOM during input of video or DTV sig-
Additional Item(s) Excluded from
nals.
Warranty Coverage (if any):
An unusual sound is
Dot by dot
occasionally heard
Where to Obtain Service:
Mode that projects images in their native resolution.
from the cabinet.
Maintenance
indicator illuminates.
What to do to Obtain Service:
Power indicator and
lamp indicator do not
come on while projecting.
Downloaded from ProjectorsManual.com Manuals
Projector power cord is not plugged into the wall outlet.
Power to the external connected devices is off.
The selected input mode is wrong.
Cables incorrectly connected to rear panel of the projector.
Remote control batteries have run out.
External output has not been set when connecting notebook computer.
The cover of the lamp unit is not installed correctly.
The selected "Signal Type" is wrong.
The video signal format of the video equipment is not set correctly.
"Bright" is set to minimum position.
Picture adjustments are incorrectly set.
(Video Input only)
Video input system is incorrectly set.
(INPUT 1, 2 and 5 only)
Input signal type is incorrectly set.
Adjust the focus.
The projection distance exceeds the focus range.
(Computer Input only)
Perform "Fine Sync" Adjustments ("Clock" Adjustment)
Perform "Fine Sync" Adjustments ("Phase" Adjustment)
Noise will appear depending on the computer.
The "DNR" (Digital Noise Reduction) setting is not correct.
If the picture is normal, the sound is due to cabinet shrinkage
caused by a room temperature changes. This will not affect
operation or performance.
See "Maintenance Indicators".
"LED" is set to "OFF".
TO OBTAIN PRODUCT INFORMATION, CALL 1-877-DTV-SHARP OR VISIT www.sharpusa.com.
Gamma
Image quality enhancement function that offers a
richer image by brightening the darker portions
of the image without altering the brightness of the
brighter portions.
IP Mode
Check
The progressive display projects a smoother video
image. You can select three different modes: 2D
Progressive, 3D Progressive and Film Mode.
Keystone correction
Function to digitally correct a distorted image when
the projector is set up at an angle, smoothens out
jaggies on keystone images and compresses the
image not only horizontally but vertically keeping
the 4:3 aspect ratio.
Phase
Phase shift is a timing shift between isomorphic
signals with the same resolution. When phase level
is incorrect, the projected image typically displays
horizontal flicker.
Resize
Allows you to modify or customize the picture dis-
play mode to enhance the input image. You can
XV-Z12000 Projector
select six different modes: SIDE BAR, SMART
STRETCH, CINEMA ZOOM, STRETCH, DOT BY
(Be sure to have this information available when you need service
DOT or NORMAL.
for your Product.)
Smart Stretch
One (1) year parts and labor from date of purchase except for the
Mode that stretches the right and left sides of the
Projector Lamp for which the warranty period is ninety (90) days
4:3 image horizontally while maintaining the as-
from date of purchase. After the ninety (90) day warranty period on
pect ratio around the center of the image to dis-
the Projector Lamp, parts and labor for a lamp replacement are the
play it on the WIDE screen. responsibility of the consumer.
Stretch
Cleaning of Optical System and/or replacement of any filter.
Mode that stretches the 4:3 image horizontally to
Labor & materials required to remove and reinstall a suspended
projector in installations not accessible with a standard (8' step)
display it fully on a 16:9 screen.
ladder or ceilings exceeding 12' in height.
Labor & materials required to remove and reinstall a projector in
complex systems including, but not limited to, projectors installed
in custom enclosures, projectors connected to third party control
and automation systems, and realignment of projectors installed in
"mirrored" rear projection enclosures.
From a Sharp Authorized Servicer located in the United States. To
find the location of the nearest Sharp Authorized Servicer, call Sharp
toll free at 1-800-BE-SHARP.
Contact your Sharp Authorized Servicer to obtain in-home service
for this Product. The Servicer will come to your home and if
necessary to remove the Product for repair at the Servicer's facility,
the Servicer will reinstall it upon completion of repair. Be sure to
have Proof of Purchase available.
Page
16
–
35
17-26
13
–
81
69
70
47
47
70
69
28
30-31
57
57
–
50
–
78
67