Cisco AIR-ANT2451NV-R Technical Manual page 8

Installation Notes

Figure 2

Reinstall the ceiling tile.

Step 8

Step 9

Connect the antenna cables to the access point.

Note

Suggested Cable

Cisco recommends a high-quality, low-loss cable for use with the antenna.

Coaxial cable loses efficiency as the frequency increases, resulting in signal loss. The cable should be

Note

kept as short as possible because cable length also determines the amount of signal loss (the longer the

run, the greater the loss).

Cisco Aironet Dual Band MIMO Low Profile Ceiling Mount Antenna (AIR-ANT2451NV-R)

Ceiling Tile Finished Installation

The 5-GHz antenna cables are identified by a blue collar near the connectors. Make sure that you

connect these cables to the 5-GHz antenna connection on the access point.

78-19022-02

Table of Contents