JVC HR-XV3EK Service Manual page 20

Dvd player & video cassette recorder

Hide thumbs Also See for HR-XV3EK:

4.4.7 Flap adjustment of the pick-up guide shaft

Please perform flap adjustment of the pick-up guide shaft in the following case:

• Just after you exchange the pick-up.

• Just after you exchange the spindle motor.

• Just after you exchange the traverse mechanism base.

NOTE:

Please perform flap adjustment of the pick-up guide shaft when you exchange the parts above and also when you remove the

parts above.

• When the reading accuracy of the signal is bad (There is a block noise in the screen, Screen stops in the outer circumference of a

disc, etc.)

4.4.7.1

Tool for adjustment

* The screwdriver

* Test disc

*Stud

* Extension cord

1-24 (No.YD002)

good on the market

part number : VT-501

part number : JIGXVS40 (Note: One of the four studs is not used here.)

part number : EXTXV521CB

XV-521 CN502

CONT CONNECT

Used two set of this part.

Hr-xv31ek Hr-xvs30ek Hr-xvs30ex Hr-xv32ek Hr-xv3ex Hr-xv31ex