Leb Electronics STONE 180 Instructions, Maintenance, Installation And Warnings Manual page 20

MD
Type of risks
Ann. 1
1.2.5 [17] Consistency of
controls
1.5.14 [18] Risk of trapping.
1.2.4 [19] Emergency stop.
Integration principles for
safety and information.
1.7.1
[20] Signalling
equipment.
1.7.2
[21] Warnings.
1.7.3
[22] Marking.
[23] Operating
1.7.4
instructions.
[23] Maintenance.
1.6.1
[24] Unprotected residual
1.1.2
risks.
Evaluation criteria and solutions to be adopted
(Tick the box corresponding to the solution adopted)
Install the controls (e.g. key selector) so that the user is not in a danger
zone, and check that the meaning of the controls has been understood by the
user (for example the function selector).
Use CE-marked radio controls pursuant to the R&TTE directive
(1999/5/EEC) and complying with the frequencies admitted by the laws of
each individual country.
Install a device for release of the drive unit that allows manual opening and
closure of the leaf with force no higher than 225 N (for doors/gates in
residential areas) or 390 N (for doors/gates in industrial or commercial areas).
Supply the user with the means and instructions for the release operations.
Check that operation of the release device is simple and does not create
additional risks.
If appropriate, install an emergency stop control in accordance with the
standard EN 418.
N.B. Make sure that the emergency stop does not introduce additional risks,
aborting operation of the safety devices installed.
A flashing light should be installed, in a visible position, to indicate
movement of the leaf.
Traffic lights can be installed to control vehicle traffic.
Reflectors can also be attached to the leaf.
Attach all those signs or warnings considered necessary for indicating any
unprotected residual risks and to indicate any foreseeable improper use.
Attach the label or plate with the CE marking and containing at least what
is shown in the illustration.
Manufacturer (name – address): _____________
Type of gate: _____________________________
Identification number: _____________________
Year of manufacture: ______________________
Consign to the user the operating instructions, safety warnings and EC
declaration of conformity (cf. facsimile in Annex 2).
A maintenance plan has to be drawn up and implemented.
Check on the proper working of the safety devices at least every 6 months.
Record the work carried out in the proof book in accordance with the
standard EN 12635 (cf. facsimile in Annex 1).
Inform the user in writing (for example in the operating instructions) of any
unprotected residual risks and foreseeable improper use.
-
6 -
Automatic Gate
UNAC Guide No. 2- July 2005