Table of Contents
Advertisement
2. Paper Specifications and Adding
Paper
This chapter describes how to load paper and originals, and about their specifications.
Workflow for Loading Paper and Configuring
Paper Sizes and Types
This section explains how to load paper and the operations required after loading paper.
After doing the following procedures, you can copy or print on the paper that is loaded in the machine.
1 Load paper into the paper tray.
MF
2 Specify the paper type and size using the control panel, Web Image Monitor, or Smart
MF
Organizing Monitor.
3 Specify the paper type and size on the printer driver.
MF
1 Load paper into the paper tray.
P
2 Specify the paper type and size using Web Image Monitor or Smart Organizing Monitor.
P
3 Specify the paper type and size on the printer driver.
P
For details about the procedures, refer to the next page.
Procedure
1
2
opal-p3_mf3_com_user_guide_gb_00228425_eng.xml
• When loading paper into Tray 1
See page 41 "Loading Paper into Tray 1".
• When loading paper into the bypass tray
See page 46 "Loading Paper into the Bypass Tray".
•
When using the control panel
MF
See page 49 "Specifying Paper Type and Paper Size Using
MF
the Control Panel".
• When using Web Image Monitor
See page 53 "Specifying Paper Type and Paper Size Using Web
Image Monitor".
• When using Smart Organizing Monitor
See page 52 "Specifying Paper Type and Paper Size Using Smart
Organizing Monitor".
Reference
39
Draft 2016/05/27
Advertisement
Table of Contents
