Table of Contents
Advertisement
• Do not place different size originals in the ADF at once.
• Straighten curls in the originals before placing them in the ADF.
• To prevent multiple sheets from being fed at once, fan the pages of your original before placing
them in the ADF.
• Place the original squarely.
1.
Open the cover of the input tray for the ADF and adjust the guides according to the size of
the original.
2.
Place the aligned originals face up in the ADF. The last page should be on the bottom.
• When placing originals longer than A4, pull out the ADF tray's extenders.
About Originals
This section describes the types of originals that can be placed and the parts of the original that are
unscannable.
opal-p3_mf3_com_user_guide_gb_00228431_eng.xml
DPH050
DPH051
Placing Originals
63
Draft 2016/05/27
Advertisement
Table of Contents
