Operation - Rextron MACNM-H90 User Manual

Operation

Using Menu Bar Control
Once software has been installed to the Mac, simply plug each xtraCoN Unit
connected with display into the Mac. You can now use up to 4 additional
monitors. When attaching a monitor to your Mac, by default, the monitor will
be extended to the right of the main display.
Configuring Display from the Menu Bar
Check the “"Show displays in menu bar”" in Display Preference then you
can configure displays by clicking the display icon in the menu bar.
Detect Displays: Detect all displays connected to the Mac.
Turn On/ Off Mirroring: Turn display mirroring on/off
Number of Recent Items: Configure how many “"recent resolutions”"
Display Preferences: Open “"Display Preferences”"
: Set the resolution of the primary display.
: Set the resolution of additional display(s)
should be shown in this menu.
39
Mac