Operation; Led; Equalizer Selector - Rextron EV214 User Manual

----------------- Operation

LED

There are two LEDs on the Local unit. The POWER LED must
illuminate indicating the unit is properly powered. The ACTIVE
LED illuminates when there is VGA input signals.
Likewise, the POWER LED of the Remote unit illuminates
indicating the unit is properly powered. Its ACTIVE LED illuminates
when VGA signals are properly decoded for the two local HDB15
VGA ports. The ACTIVE LED never turns on, if the "VGA + Audio
CAT5 Extender" is used to transmit audio signals only.

Equalizer selector

You may adjust the Equalizer selector on the Remote unit to get
optimum video signal for various cable lengths. There are four
segments of various lengths on the selector indicating different
length of cables. The following table can be used as a reference
for selecting the Equalizer.
CAT5 cable length
meter
0 ~ 40
40 ~ 80 131 ~ 262
80 ~ 120 262 ~ 394
120 ~ 160 394 ~ 525
Equalizer
position
feet
0 ~ 131
9