Windows 2000/Xp/Vista/7; Driver Installation - Rextron MACNM-H90 User Manual

-------------- Windows 2000/XP/Vista/7

Driver Installation

The source computer running Windows 2000/XP/Vista/7 is required to install
the appropriate Unit software according to the interconnection deployment
method that could be Extending the video via the Local Area Network system
or Extending the video via USB. Please follow the instructions below listed
step by step for your driver installation.
All the prompt screens and dialog boxes shown in this section are for
Windows 2000/XP/Vista/7. Some dialog boxes and folders may slightly
different in other versions of Windows.
NOTE: The driver installation procedure and software operations may differ
from version to version, that may cause the snapshot on this user’' s
manual slightly differ from others without affecting the function.
NOTE: If you have software installed you must uninstall it, using the
Windows Add/Remove Programs feature, before installing this
release.
NOTE: On some machines you may need to reboot before you can use
your xtraCoN enabled device.
Install the xtraviU driver (Windows 2000/XP/Vista/7)
1. Insert the CD into the CD/DVD-ROM drive and browse:
X:\ Windows\ XtraviU\ XtraViU_X.x.xxxxx
Double-click on the “"XtraViU_X.x.xxxxx”" file to begin the
installation (The version of driver may vary, please contact your
local dealer for the latest driver)
2. Use an USB A-B Cable to connect the Unit to your computer
after the installation completed.
3. Power ON the Unit and you can find this icon in the System Tray:
12