Additional Requirements - Rextron MACNM-H90 User Manual

Additional Requirements

The Unit software can be installed on any desktop or laptop system
running Windows 2000 SP4, Windows XP SP2 or SP3, Windows Vista
SP1/SP2 32-bit and 64-bit editions, Windows 7 and Intel-based Mac OS
10.4/10.5. Any predecessor versions of the Windows or other
platforms that are not mentioned here won’'t be supported by any
drives currently.
Depending on the interconnection deployments that include Video+Audio
extending via LAN and Video+Audio extending via USB, users can select
the appropriate Unit software driver from the provided CD for the driver
installation to the source computer.
- For the source computer running Windows 2000 SP4, Windows XP SP2
or SP3, Windows Vista SP1/SP2 32-bit and 64-bit editions, and
Windows 7, the scheme of Video+Audio extending via LAN/ USB
can be implemented by using any model of xtraCoN Series.
- For the source computer running Intel-based Mac OS 10.4/10.5, the
scheme of video extending via USB can be implemented by using
any model of xtraCoN Series, and the scheme of video extending via
LAN is impracticable in this platform.
For the details of driver installation, please proceed to the sections
entitled “"Windows 2000/ XP/ Vista/ 7”" or “"Intel-based Mac OS
10.4/10.5”"
NOTE: Long cable lengths between the Units and source computer
may adversely affect image quality at high resolutions and
refresh rates. If users need to run remote displays at high
resolutions and frequencies, use as little Ethernet cabling
between locations as possible and avoid practices such as
“"coiling”" unused cable in a ceiling or behind the display.
(USB A-B Cable for connection between the source computer
and the Unit should not exceed 5 meters.)
8