Statically Assign An Ip Address - D-Link DAP-2310 User Manual

Appendix B - Networking Basics

Statically Assign an IP address

If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps
DGNQY
Step 1
®
Windows  %NKEM QP Start > Settings > Control Panel > Network Connections
®
Windows :2 %NKEM QP Start > Control Panel > Network Connections
®
Windows Vista %NKEM QP Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
network connections
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet as your network or the
LAN IP address on your router.
Example: +H VJG TQWVGT U .#0 +2 CFFTGUU KU  OCMG [QWT +2 CFFTGUU : YJGTG : KU C PWODGT
DGVYGGP  CPF  /CMG UWTG VJCV VJG PWODGT [QW EJQQUG KU PQV KP WUG QP VJG PGVYQTM 5GV &GHCWNV )CVGYC[ VJG
UCOG CU VJG .#0 +2 CFFTGUU QH [QWT TQWVGT  
D-Link DAP-2310 User Manual 72