Table of Contents
Advertisement
If some error occurs when the power is turned on or during program execution, one
of the following error messages will appear on the LCD.
Error Messages
System Program error
Problem
A System Program error has occurred.
If this error occurs, the BHT beeps five times
(for 0.1 second per beep) and then turns itself
off.
Solution
Contact your system administrator.
Low battery warning
Problem
When the BHT is turned on or off or during execution of
program, the battery output level has dropped below a
specified lower limit.
If low battery is detected, the BHT displays this
message for approx. 2 seconds and beeps three
times (for 0.1 second per beep). After that, it
will resume previous regular operation.
Solution
The battery cartridge will need to be recharged before
long.
Replace or recharge the battery cartridge.
21
Advertisement
Table of Contents
