How To Operate The Audio Control; Switching Audio Control Modes - Eclipse CD5030 Reference Manual

How to operate the AUDIO CONTROL

Switching audio control modes

Various audio control modes may be fine-tuned
using this procedure.
Press the [ENTER] button for less
1
than one second.
The Audio Control mode is activated.
Press the [ENTER] button to select
2
the item to be adjusted.
The items will switch in the order shown
below each time the button is pressed.
*1: Setting cannot be made in FM mode.
3 Turn the [VOL] knob to adjust the
volume.
28
English
*1
Mode
Adjusts the audio balance of
BALANCE
the right and left speakers
Adjusts the audio balance of
FADER
the front and rear speakers
NON-F (NON- Adjusts non-fader level (for
FADER LEVEL) subwoofer).
The loudness control may
be turned on to emphasize
low and high frequencies
LOUDNESS
a t l o w v o l u m e l e v e l s .
Loudness boosts bass and
treble at low volumes.
SVC (Source Adjusts different volume
Volume Control) levels for each audio mode.
Rotary Mode
Function
Left
Emphasizes the
left speakers.
Emphasizes rear
speakers.
D e c r e a s e t h e
subwoofer level.
Select OFF
Decrease level.
Right
Emphasizes the
right speakers.
Emphasizes front
speakers.
I n c r e a s e t h e
subwoofer level.
Select ON
Increase level.