Honeywell AreaRAE Plus User Manual page 41

AreaRAE Plus & AreaRAE Pro User's Guide
Depending on the installed sensors, standard available measurement units include:
Abbreviation Unit
ppm,ppb parts per million, parts per billion
mg/m3, ug/m3 milligrams per cubic meter, micrograms per cubic
meter
ppm parts per million
mg/m3 milligrams per cubic meter
μrem/h, mrem/h
microrems and millirems per hour
μSv/h, mSv/h
microSieverts and milliSieverts per hour
μR/h, mR/h
microRoentgens and milliRoentgens per hour
μGy/h, mGy/h
microGrays and milliGrays per hour
ppm parts per million
VOL Volume
ºF
Fahrenheit degrees
ºC
Celsius degrees
m/s meter per second
MPH mile per hour
Here is an example of the menu hierarchy (select the sensor type and then the measurement unit):
Duplicated Sensor
If there is sensor duplication (for example, two PID sensors for VOC), then the "Duplicated Sensor"
menu item is shown. You can select which of the duplicated sensors to make active. The instrument does
not support duplicate sensors.
41
Sensor
Type
PID for VOC
PID for VOC
EC
EC
Gamma
Gamma
Gamma
Gamma
CO
2
CO
2
Temperature
Temperature
Wind speed
Wind speed