View The Supported Mibs - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2

View the Supported MIBs

You can view a list of all MIBs that are supported by the switch.

To view the supported MIBs:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > SNMP > SNMP V1/V2 > Supported MIBs.
The following table describes the nonconfigurable information on the page.
Table 14. SNMP supported MIBs
Field
Name
Description
Description
The RFC number if applicable and the name of the MIB.
The RFC title or MIB description.
Configure System Information
69
Change the Default IP Address of the