General Feature Default Settings - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
Table 59. Switch default settings (continued)
Feature
MAC table address aging
Default VLAN ID
Default VLAN name
Voice VLAN
Guest VLAN
Multiple Spanning Tree
Link aggregation
LACP system priority
DiffServ
IGMP snooping
IGMP snooping querier

General Feature Default Settings

The following table describes the general feature default settings.
Table 60. General feature default settings
Feature Name/Setting
Virtual LAN (IEEE 802.1Q)
Default VLANs
PVID
Acceptable Frame Types
Ingress Filtering
Port Priority
Jumbo Frames
Maximum Frame Size
Flow Control
Admin Mode
802.1X
Port Based Authentication State
Default
300 seconds (dynamic addresses)
1
Default
Disabled
Disabled
Disabled
No link aggregation groups (LAGs) configured
32768
Disabled
Disabled
Disabled
Default
1 (Default)
Note:
1
Admit All
Disabled
0
1518
Disabled
Disabled
Specifications and Default Settings
309
All ports are members of default VLAN