Web Browser-Based Management Interface Device View - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2
Web Browser–Based Management Interface Device View
The Device View displays the ports on the switch. This graphic tool provides an alternate way
to navigate to configuration and monitoring options. The graphic tool also provides
information about device ports, configuration and status, tables, and feature components.

To use Device View:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The Switch Information page displays.
5. Select System > Device View.
Depending upon the status of the port, the port color in Device View is either red, green,
or black.
• Green indicates that the port is linking up.
• Red indicates that an error occurred on the port or that the port is administratively
disabled.
• Black indicates that no link is present.
Each port also provides two LEDs in Device View to indicate the link status of the port.
• The green LED indicates that the port is linking at a speed of 1 Gbps.
• The yellow LED indicates that the port is linking at a speed of 100 Mbps or 10 Mbps.
6. Click a port to open a menu that displays statistics and configuration options.
Change the Default IP Address of the
Get Started
19