View Stp Statistics - NETGEAR GS724TPv2 User Manual

NETGEAR 24-Port Gigabit Smart Managed Pro Switch with PoE+ and 2 SFP Ports Model GS724TPv2

View STP Statistics

You can view information about the number and type of bridge protocol data units (BPDUs)
transmitted and received on each port.

To view Spanning Tree statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 9.
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > STP > Advanced > STP Statistics.
6. To refresh the page with the latest information about the switch, click the Update button.
The following table describes the nonconfigurable information on the page.
Table 29. STP Statistics
Field
Interface
STP BPDUs Received
STP BPDUs Transmitted
RSTP BPDUs Received
RSTP BPDUs Transmitted
Description
Selects one of the physical or port channel interfaces of the switch.
Number of STP BPDUs received at the selected port.
Number of STP BPDUs transmitted from the selected port.
Number of RSTP BPDUs received at the selected port.
Number of RSTP BPDUs transmitted from the selected port.
Configure Switching
130
Change the Default IP Address of the