Ws-Ap3725 Led Indicators; Ws-Ap3725 Leds (Front, Lower Right); Ws-Ap3725 Led Indications - Enterasys WS-AP3710i Installation Manual

WS-AP3725 LED Indicators

Both models of the WS-AP3725 have six LED indicators, as shown in
provide status information, described in
more information, see the Enterasys Wireless Convergence Software User Guide.
Figure 1-8
Table 1-3 WS-AP3725 LED Indications
LED
1 (AP status)
2 (Ethernet 1 link state)
3 (Ethernet 2 link state)
1-10 WS-AP3725 Overview

WS-AP3725 LEDs (Front, lower right)

Identifies power
Indicator LED
DRAFT
Table 1-3, on the current state of the WS-AP3725. For
Identifies LAN
Indicator LEDs
Status
On Green
Flashing Green
On Red
On Green
On Blue
Off
On Green
On Blue
Off
Figure 1-8 below. The LEDs
Identifies Radio
Indicator LEDs
Description
Indicates the WS-AP3710 is working
normally.
Indicates:
• running a self test
• loading software program
Indicates a CPU/system failure.
Indicates a valid 100Mbps Ethernet link.
Indicates a valid 1Gbps Ethernet link.
Indicates the link is down.
Indicates a valid 100Mbps Ethernet link.
Indicates a valid 1Gbps Ethernet link.
Indicates the link is down.