Table of Contents
Advertisement
The guide describes how to mount and connect cables to the Enterasys Wireless AP3710/AP3725
access points (WS-AP3710i, WS-AP3710e, WS-AP3725i, and WS-AP3725e). In addition, this guide
provides information on the product certifications and national approvals for the AP3710/AP3725
access points.
Who Should Use This Guide
This product should be installed and serviced by a qualified licensed technician, electrician, or
electrical maintenance person familiar with its operation and the hazards involved. Proper
installation, which includes wiring, mounting, fusing or other over current protection and
grounding, can reduce the chance of electric shocks, fires, or explosion in this product or products
used within this product.
How to Use This Guide
Read through this guide completely to familiarize yourself with its contents and to gain an
understanding of the features and capabilities of the AP3710/AP3725 access points. A general
working knowledge of data communications networks is helpful when setting up this product.
This preface provides an overview of this guide, defines the conventions used in this document,
and instructs how to obtain technical support from Enterasys Networks. To locate information
about various subjects in this guide, refer to the following table.
For...
An overview of the AP3710/AP3725 features.
Instructions to mount the AP3710/AP3725, connect cables,
and connect power. Instructions are also included to mount
and connect the optional Power Supply.
Specifications, environmental requirements, and physical
properties of the AP3710/AP3725 and optional Power Supply.
Regulatory certifications and national approvals.
Note: This guide does not provide information on configuration of the access points. For
information on how to configure the access points, see the Enterasys Wireless Convergence
Software User Guide.
Electrical Hazard: Only qualified personnel should install or service this unit.
Riesgo Electrico: Nada mas personal capacitado debe de instalar o darle servicio a esta unida.
Elektrischer Gefahrenhinweis: Installationen oder Servicearbeiten sollten nur durch
ausgebildetes und qualifiziertes Personal vorgenommen werden.
DRAFT
About This Guide
Refer to...
Chapter
1,
Introduction
Chapter
2,
Installation
Appendix
A,
Specifications
Appendix
B,
Regulatory Information
Enterasys Wireless AP3710/AP3725 Installation Guide ix
Hide quick links:
Advertisement
Table of Contents
