This section provides overviews of deployment scenarios, as well as configuration instructions for connecting your SonicWall SMA
appliance to various network devices, including gateway appliances.
•
Selecting a Deployment Scenario on page 32
•
Configuring the X0 IP Address on page 34
•
Configuring a Default Route on page 35
•
Adding a NetExtender Client Route on page 35
•
Setting Your NetExtender Address Range on page 36
•
Adding a New SMA Custom Zone on page 38
•
Scenario A: Connecting the SMA on a New DMZ on page 40
•
Scenario B: Connecting the SMA on an Existing DMZ on page 45
•
Scenario C: Connecting the SMA on the LAN on page 49
•
Testing and Troubleshooting Your Remote Connection on page 52
TIP: Before performing the procedures in this section, fill out the information in What You Need to Begin on page 16.
Deploying Your Appliance
SonicWall Secure Mobile Access 200/400 Getting Started Guide
5
31