The Back Panel - TP-Link Archer MR400 User Manual

Ac1350 wireless dual band 4g lte router
Hide thumbs Also See for Archer MR400:
Table of Contents

Advertisement

Chapter 1
1. 2. 2.

The Back Panel

The following parts (view from left to right) are located on the rear panel.
Item
POWER Port
POWER ON/OFF Button
LAN1, LAN2, LAN3,
LAN4/WAN
WPS/RESET
Wi-Fi ON/OFF
SIM Card Slot
Antennas
For connecting the router to power socket via the provided power adapter.
Press this button to power on or off the router.
For connecting to your PCs or other Ethernet network devices.
In wireless router mode, the LAN4/WAN port is used for connecting to a Cable/FTTH/
VDSL/ADSL device.
Press and hold this button until all the LEDs except the Power LED turn on momentarily to
restore the router to its factory default settings.
To enable the WPS function, press this button about 2 seconds. If you have a WPS-
supported device, you can press this button to quickly establish connection between
the router and the client device and automatically configure wireless security for your
wireless network.
For turning on/off the Wi-Fi function.
For holding the SIM card.
Used for data sessions over LTE. Upright them for the best mobile internet signal.
Get to Know Your 4G LTE Router
Description
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents