Reserve Lan Ip Addresses - TP-Link Archer MR400 User Manual

Chapter 11
2. You can also appoint IP addresses within a specified range to devices of the same type by using
feature. For example, you can assign IP addresses within the range (192.168.1.50 to192.168.1.80) to Camera devices,
thus facilitating the network management. Enable DHCP feature and configure the parameters according to your
actual situation on Advanced

11. 4. 3. Reserve LAN IP Addresses

You can view and add a reserved address for a client. When you specify an IP address
for a device on the LAN, that device will always receive the same IP address each time
when it accesses the DHCP server. If there are some devices in the LAN that require
permanent IP addresses, please configure Address Reservation on the router for the
purpose.
Follow the steps below to reserve an IP address for your device.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced
3. Scroll down to locate the
reservation entry for your device.
4. Enter the MAC address
5. Specify the IP address which will be reserved by the router.
6. Check to Enable this entry
> Network > LAN Settings
> Network > LAN Settings
Address Reservation
of the device for which you want to reserve IP address.
and click OK
Specify Your Network Settings
page.
page.
table and click
to make the settings effective.
Condition Pool
Add to add an address
49