Schedule Your Wireless Function - TP-Link Archer MR400 User Manual

Chapter 11
Method 3 Enter the router's PIN on your client device
Use this method if your client device asks for the router's PIN.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced
5GHz according to your wireless client.
3. Keep the Router's PIN status as enabled. Take a note of the Current PIN of the router.
You can also click the
4. On the client device, enter the router's PIN. (The default PIN is also labeled on the
bottom of the router.)
5. The WPS LED flashes for about two minutes during the WPS process.
6. When the WPS LED is on, the client device has successfully connected to the router.
Note:
1. The WPS LED on the router will light on for no more than five minutes if the device has been successfully added to
the network.
2. The WPS function cannot be configured if the wireless function of the router is disabled. Please make sure the
wireless function is enabled before configuring the WPS.

11. 5. 3. Schedule Your Wireless Function

You can automatically turn off your wireless network (both 2.4GHz and 5GHz) at time
when you do not need the wireless connection.
1. Visit http://tplinkmodem.net, and log in with the password you set for the router.
2. Go to Advanced
3. Toggle on the button to enable the
> Wireless > WPS page. Select the wireless network 2.4GHz or
Generate button to get a new PIN.
> Wireless > Wireless Schedule
Wireless Schedule
Specify Your Network Settings
page.
feature.
53