Table of Contents
Advertisement
Chapter 2
2. Connect your computer to the router.
Method 1: Wired
Connect your computer's Ethernet port to one of the LAN ports on Archer MR400 via
an Ethernet cable.
Method 2: Wirelessly
Use the default SSID (Wireless Network Name) and Wireless Password printed on the
product label of the router to connect wirelessly.
Method 3: Use the WPS button
Wireless devices that support WPS, including Android phones, tablets, most USB
network cards, can be connected to your router through this method. (WPS is not
supported by iOS devices.)
Note:
The WPS function cannot be configured if the wireless function of the router is disabled. Also, the WPS function will be
disabled if your wireless encryption is WEP. Please make sure the wireless function is enabled and is configured with the
appropriate encryption before configuring the WPS.
1 ) Tab the WPS icon on the device's screen.
2 ) Immediately press the WPS button on your router.
3 ) The WPS LED flashes for about 2 minutes during the WPS process.
4 ) When the WPS LED is on, the client device has successfully connected to the
router.
3
Connect the power adatpter to
the router and push in to turn on
the router.
Connect the Hardware
1
Install the 4G LTE antennas and
position them upwards.
2
Insert the SIM card into the slot until
you hear a click.
Note: A Micro or Nano SIM card must be
converted using the SIM card adapter
provided.
8
Hide quick links:
Advertisement
Table of Contents
