Download  Print this page

Factory Reset - Siemens EQ.3 Instruction Manual

Fully automatic espresso machine ti 3.3., ti 3.5..
Hide thumbs

Advertisement

en Settings
The table shows the allocation of the
levels to the different degrees of water
hardness:
Level
Degree of water hardness
German (°dH)
1
1-7
2
8-14
3
15-21
4
22-30
Subsequent changes to the water
hardness can be made at any time.
When using the water filter (see
Note:
section "Accessories"), proceed as
follows ~ "Water filter" on page 39.
42
French (°fH)
1-13
14-25
26-38
39-54

Factory reset

If you set the appliance back to the
factory settings, you will lose your own
settings.
Press and hold % and
1.
calc'nClean for at least 3 seconds.
Touch the "V" button cappuccino
2.
repeatedly until "Factory reset"
appears.
Confirm by pressing the "ok" button
3.
latte macchiato.
The factory settings are activated,
the language selection appears.
Touch the "V" button cappuccino
4.
repeatedly until the required
language appears on the display.
Touch the "ok" button latte
5.
macchiato to confirm the setting.
The appliance rinses and is ready to
use when "Choose beverage"
appears on the display.

Advertisement

Chapters

   Also See for Siemens EQ.3

This manual also for:

Ti 303Ti 305

Comments to this Manuals

Symbols: 0
Latest comments: