Assigning Daw Mode (Mackie Control/Hui) With Imap - ICON PLATFORM M Plus User Manual

Assigning DAW mode (Mackie control/HUI)
with iMap
Platform-M/X/M+
TM
iMap Platform M
Tip: You may also use the hardware to select DAW mode


instead of through iMap. Please refer to P.9 for instructions.





To begin the DAW mode setup, let make the connection of your Platform M+
with iMap. Please follow the below steps:
1. Connect Platform M
2. Launch iMap and click "Connect Device".
Note:

If your Platform M
"There are no MIDI input devices" will appear. Please connect Platform M
your Mac/PC with the provided USB cable.
38
TM
+
software panel
+
to your Mac/PC.
+
is not connected to your Mac/PC, the message
Diagram 7
+
to