Philips HR6835 User Manual page 9

- Switch on (fig. 34).
• To prevent overfilling
and to protect the
motor, the round-
shaped float shuts off
the air/water stream if
the container is full
(fig. 35).
- If this happens, empty
the container (fig. 36).
Then you can continue.
• Caution: When vacuuming water from a
basin which is higher than the appliance
(e.g. roof-gutter, cistern) the system will
inevitably function as a syphon.
As a result, the container may become
overfilled (fig. 37).
For your personal safety, ensure never to
exceed the maximum capacity of the
container which is 9 litre / 2 gallon of water.
At regular intervals, lift the nozzle out of the
water, switch off, remove the mains plug from
the wall socket and empty the container.
37
MAX
9 Ltr.
Shampooing: floors
After vacuuming liquid:
- Switch off. Remove the mains plug from the
wall socket. Empty, clean and dry the container.
Let the appliance operate with dry clean air for
a couple of minutes to dry the inside of the
38
Remove: paper dustbag and Micro Filter.
Place: float unit, diffusor, (filled) shampoo
reservoir, Double Injection nozzle and
shampoo trigger.
40
- Prepare the vacuum cleaner as indicated for
"vacuuming liquids" (i.e. previous section).
- Fill the shampoo reservoir with cold water
(fig. 38).
9
39
1x
tubes and hose.
41
2
1