Philips HR6835 User Manual page 6

How to make your Triathlon
ready for use
General
7
• Connecting the hose: Slightly turning, insert
the end of the hose into the hose connector
(fig. 7).
To disconnect: Slightly turning, pull the end of
the hose out of the
connector (fig. 8).
• Connecting the tubes
and nozzles:
Press the spring-back
knob and insert the
narrowed section into
the wider section. The
spring-back knob fits
into the opening
(fig. 9).
To disconnect: press
the spring-back knob and pull the sections away
from each other.
• Make the vacuum cleaner ready for either dry
vacuum cleaning, for vacuuming liquid or for
shampooing.
Before first use: open container and remove
dust bag holder.
(For dry use: fix and position dustbag.)
8
9
Dry vacuuming cleaning
Remove: float unit and diffusor.
Place: Micro Filter and paper dustbag.
10
- Remove the mains plug from the wall socket.
- Undo the clamps (fig. 10).
- Using the handle, lift the motor unit from the
container (fig. 11).
12
- Remove the float unit
(fig. 12).
- Undo the shampoo
tube: rotate clockwise
(1) and pull (2)
(fig. 13).
- Remove the shampoo
reservoir (fig. 14).
6
11
13
1
2
14