Available Image Aspect Ratios - Epson 2100 User Manual

1. Turn on the projector and switch to the image source you want to use.
2. Press the Menu button.
3. Select the Signal menu and press Enter.
4. Select Aspect and press Enter.
5. Select the aspect ratio you want to use for your input signal and press Enter.
6. Press Menu or Esc to exit the menus.
Parent topic: Image Aspect Ratio
Related references
Input Signal Settings - Signal Menu

Available Image Aspect Ratios

You can select the following image aspect ratios, depending on the input signal from your image source.
Note: When the projector is in 3D mode or projecting in Full HD resolution via an HDMI connection, the
aspect ratio is automatically set to Normal.
Note: Black bands and cropped images may project in certain aspect ratios, depending on the aspect
ratio and resolution of your input signal.
73