Epson 2100 User Manual page 105

Event ID code Cause and solution
0020 Screen Mirroring communication error occurred. Turn the projector off and then on
again, or restart the network software.
0026
0032
0036
0037
0021 Screen Mirroring did not start. Turn the projector off and then on again.
0022 Unstable Screen Mirroring communication. Check the network communication
status, wait a few moments, and try connecting to the network again.
0027
0028
0029
0030
0031
0035
0023 Connection failed. If you see the PIN entry screen on your computer, enter the PIN
code displayed on the Screen Mirroring standby screen or at the bottom right of the
0024
projected image. If this does not solve the problem, restart the projector and
0025 connected devices, then check the connection settings.
0038 Wireless LAN system mismatch. Check the wireless LAN settings for the mobile
device and projector, then try connecting again.
0042
0041 Connection failed. Delete the recorded projector information on your computer and
try connecting again.
0043 The video format is not supported. Change the resolution of the mobile device or
select a different Adjust Image Quality setting , then try connecting again.
0432 The network software did not start. Turn the projector off and then on again.
0435
0433 Cannot display the transferred images. Restart the network software.
105