Fcc Compliance Statement - Epson 2100 User Manual

No. Symbol
19
20
21
22
23
Parent topic:

FCC Compliance Statement

For United States Users
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference to radio and television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
Approved Standards
ISO 3864
—
—
ISO3864
IEC60825-1
ISO 3864
Notices
Description
Contact prohibition
To indicate injury that could occur due to
touching a specific part of the equipment.
Never look into the optical lens while the
projector is on.
To indicate that the marked item don't
place anything on projector.
Caution, laser radiation
To indicate the equipment has a laser
radiation part.
Disassembly prohibition
To indicate a risk of injury, such as
electric shock, if the equipment is
disassembled.
152