Warranty; Introduction; Shipping Damage Claim Procedure; Safety - Garland MWGH-9501 Operation Manual

WARRANTY

This warranty covers
workmanship under normal use providing that:
a) the equipment has not been accidentally or
intentionally damaged, altered or misused.
b) the equipment is properly installed, adjusted,
operated and maintained in accordance with
national and local codes and in accordance with
the installation instructions provided with this
product.
c) the warranty serial number affixed to the appliance
by us has not been defaced, obliterated or
removed.
d) an acceptable report for any claim under this
warranty is supplied to us.
The equipment warranty coverage remains in force for
one (1) year (parts and labor) from the date the
equipment is put into operation and two (2) years
(parts only) for the microprocessor controller, motor
speed controller and upper platen (aluminum casting
and shroud).
The Garland Group agrees to repair or replace, at it's
option, any part that proves to be defective in material
or workmanship at no charge for the part or normal
labor.
We assume no responsibility
adjustments, diagnosis, or normal maintenance such
as: lubrication of springs or valves. We exclude
failures caused by erratic voltage or gas supplies. We
assume no responsibility for travel costs beyond 100
miles round trip, travel other than overland, and
overtime costs of repair. We exclude broken glass,
paint and porcelain finish, surface rust, gasket
material, ceramic material, light bulbs and fuses from
normal coverage. We exclude damage or dysfunction
caused by fire, flood, and like "Acts of God" that are
beyond the control of The Garland Group.
The Garland Group's liability on a claim of warranty
shall not exceed the price of the material and/or
service, which caused the claim. This warranty is
limited and is in lieu of all other warranties, expressed
or implied. The Garland Group, our employees, or our
agents shall not be held liable for any claims of
personal injury or consequential damage or loss. This
warranty gives you specific legal rights, and you may
have other rights which vary from state to state.

INTRODUCTION

The Garland clamshell grill, manufactured exclusively
for McDonald's, provides a method for efficient two-
defects in material
for installation,
sided cooking, while accommodating a variety of
products. The unit will also serve as a flat grill, and
meets all of McDonald's standards for safety,
and
efficiency, and cleanliness.

SHIPPING DAMAGE CLAIM PROCEDURE

Please note that the Garland equipment was carefully
inspected and packed by skilled personnel before
leaving the factory.
assumes full responsibility for safe delivery upon
acceptance of the equipment.
What to do if the equipment arrives damaged:
1. File a claim immediately regardless of the extent
of damage.
2. Be sure to note, "visible loss or damage," on the
freight bill or express receipt and have the person
making the delivery sign it.
3. Concealed loss or damage:
unnoticed until the equipment is unpacked, notify
the freight company immediately, (within 15 days),
and file a concealed damage claim.
Always follow these safety precautions when operating
the clamshell grill.
This grill must only be operated by persons who have
been given adequate training.
CAUTION: THIS EQUIPMENT MUST ONLY BE
DO NOT OPERATE THE GRILL UNLESS IT HAS
BEEN COMMISSIONED (START-UP) BY
A FACTORY AUTHORIZED SERVICE
CENTER.
DO NOT operate the grill without reading this
DO NOT operate the clamshell grill unless it has been
properly installed and grounded.
DO NOT operate the clamshell grill unless all service
and access panels are in place and fastened
properly.
The Garland clamshell grill is a semi-automatic
cooking appliance. The upper platen is lowered
Automatically, following the manual, two-handed
initiation of the cooking cycle, and the upper platen is
raised automatically upon completion of the cooking
cycle.
4
The transportation company

SAFETY

OPERATED UNDER AN APPROVED
HOOD SYSTEM.
operation manual.
if damage is