Table of Contents
Advertisement
Installation & Operation Manual
WiFi Thermostat 562
Introduction
The WiFi Thermostat 562 provides precise temperature control of a heating and
cooling system. When connected to the Internet, the mobile app and website allow
you to control the thermostat remotely. The thermostat and mobile app include an
away feature that overrides the schedule to lower the temperature and increase
energy savings. The thermostat is designed to support radiant floor heating and
optional floor sensors can be installed to enhance comfort and protect floor coverings.
© 2017 tekmar 562 _ D - 08/17
Features
• Mobile app for iOS and Android
• Supports optional floor sensor
• Automatic software updates
• Outdoor temperature
• Local weather
• Email error and warning notifications
• Time clock updated from Internet
• 7 day programmable schedule
• Away energy savings mode
• Early start
• Energy monitoring
• English/Français/Español languages
• 3.5" color touchscreen
• Selectable background colors
562 _ D
08/17
Zoning
Replaces: 12/16
Advertisement
Table of Contents
Related Manuals for Tekmar 562
Summary of Contents for Tekmar 562
- Page 1 Replaces: 12/16 Introduction The WiFi Thermostat 562 provides precise temperature control of a heating and cooling system. When connected to the Internet, the mobile app and website allow you to control the thermostat remotely. The thermostat and mobile app include an away feature that overrides the schedule to lower the temperature and increase energy savings.
-
Page 2: Table Of Contents
Setup - Alerts ....................18 Setup - Relays ....................19 tekmar Connect Web and Mobile App .............20 Troubleshooting ....................22 Error Messages ....................22 Technical Data ....................23 Limited Warranty and Product Return Procedure ...........24 © 2017 tekmar 562 _ D - 08/17 2 of 24... -
Page 3: Important Safety Information
Important Safety Information It is your responsibility to ensure that this thermostat is safely installed according to all applicable codes and standards. tekmar is not responsible for damages resulting from improper installation and/or maintenance. This is a safety-alert symbol. The safety alert symbol is shown alone or used with a signal word (DANGER, WARNING, or CAUTION), a pictorial and/or a safety message to identify hazards. -
Page 4: Installation
Removing The Thermostat Base While holding the base section in one hand, pull the lower half of the display front towards you to pivot it away from the base. © 2017 tekmar 562 _ D - 08/17 4 of 24... -
Page 5: Mounting The Thermostat
• Set Jumper J3 to On connects power R J1 J2 J3 to the Rc wiring terminal. RELAY POWER JUMPER • Set the jumper to off to disconnect the power from Rh1, Rh2, or Rc respectively. © 2017 tekmar 562 _ D - 08/17 5 of 24... -
Page 6: Application 562-1
Application 562-1 The WiFi Thermostat 562 operates a one or two-stage furnace for heating and an air conditioner for cooling. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - -... -
Page 7: Application 562-2
Application 562-2 The WiFi Thermostat 562 operates a first stage radiant floor and a second stage furnace for heating, and an air conditioner for cooling. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - -... -
Page 8: Application 562-3
Application 562-3 The WiFi Thermostat 562 operates a first stage radiant floor and a second stage fan coil for heating, and an air conditioner for cooling. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - -... -
Page 9: Application 562-4
Application 562-4 The WiFi Thermostat 562 operates a first stage baseboard/radiator and a second stage fan coil for heating, and an air conditioner for cooling. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- - - - - - - -... -
Page 10: Sequence Of Operation
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Cold Weather Shut Down (CWSD) The cooling system can automatically shut off based upon the outdoor temperature and CWSD setting. This prevents unwanted cooling during the winter. © 2017 tekmar 562 _ D - 08/17 10 of 24... -
Page 11: User Interface
Select either Heat To or Cool To Save Cancel Hold overrides the programmed schedule 'Save to schedule' applies until the time shown the new temperature to the current schedule event. © 2017 tekmar 562 _ D - 08/17 11 of 24... -
Page 12: User Settings
The away setting is shared to: • All WiFi Thermostats in a mobile app "Location" • WiFi Thermostat 562 shares the away signal to Thermostats 518 & 519 connected to tekmar Switching Relays 304P & 306P or Zone Valve Controls 304V & 306P... -
Page 13: Display
White, Blue, BACKGROUND Black, Latte, Blue Select the background color. Espresso English, LANGUAGE Español, English Select the language. Français SCREEN CLEAN Locks screen for 10 seconds to allow cleaning. © 2017 tekmar 562 _ D - 08/17 13 of 24... -
Page 14: Time
When a programmable schedule is used, there is a fan setting for each time period. © 2017 tekmar 562 _ D - 08/17 14 of 24... -
Page 15: Wifi
Step 6 Enter WiFi password. Enter ZIP or postal code. Select if the time is set This determines your automatically from the location for weather Internet or manually. information. © 2017 tekmar 562 _ D - 08/17 15 of 24... -
Page 16: Installer Settings
Y1, G1 SOFTWARE VERSION J1255A Display the software version. LOAD DEFAULTS Yes, All settings are returned to factory defaults. CALIBRATE TOUCHSCREEN Recalibrate the screen after loading factory defaults. © 2017 tekmar 562 _ D - 08/17 16 of 24... -
Page 17: Setup - Temp
Select the outdoor temperature at which the heating is shut off. Off, 4.5 to 35.0°C Off, 40 to 95°F COLD WEATHER SHUT DOWN Select the outdoor temperature at which the cooling is shut off. Off, 4.5 to 35.0°C © 2017 tekmar 562 _ D - 08/17 17 of 24... -
Page 18: Setup - Sensors
Off, 4.5 to 38.0°C temperature. AIR FILTER CHANGE Off, 200 to Sends an email notification to change the air filter when 2000 hours the fan exceeds this run time. © 2017 tekmar 562 _ D - 08/17 18 of 24... -
Page 19: Setup - Relays
HEAT-COOL TIME INTERLOCK When operating in Mode Auto, select the amount of time 0 to 180 to wait between switching from heating to cooling and minutes minutes vice versa. © 2017 tekmar 562 _ D - 08/17 19 of 24... -
Page 20: Tekmar Connect Web And Mobile App
Edit your account and save. Devices page. from the thermostat into the mobile app. Then enter the thermostat's room name. The app supports multiple site locations. Enter the location for the thermostat. © 2017 tekmar 562 _ D - 08/17 20 of 24... - Page 21 76° TEMP 40° 100° 72° Save temperature Temperature change hold change to the schedule SAVE TO CANCEL PROGRAM HOLD until schedule change Return to home view My Devices Account © 2017 tekmar 562 _ D - 08/17 21 of 24...
-
Page 22: Troubleshooting
Troubleshooting Error Messages When an error occurs an email notification will be sent to the registered tekmar Connect mobile or web app account owner. Description MEMORY ERROR The thermostat memory settings are corrupted. To clear, load the factory defaults in the Toolbox menu. The thermostat will not operate any heating or cooling equipment while this error message is present. -
Page 23: Technical Data
Technical Data WiFi Thermostat 562 Two Stage Heat, One Stage Cool, Fan Literature 562_C, 562_D, 562_J, 562_U Control Microprocessor control. This is not a safety (limit) control. Packaged weight 0.7 lb. (300 g) Dimensions 4-5/8" H x 3" W x 15/16" D (118 x 76 x 24 mm) -
Page 24: Limited Warranty And Product Return Procedure
(24) months from the production date. The liability of tekmar under the Limited Warranty shall be limited to, at tekmar’s sole discretion: the cost of parts and labor provided by tekmar to repair defects in materials and / or workmanship of the defective product; or to the exchange of the defective product for a warranty replacement product;...